| PC:
|
| Postscript Level 3 Drivers: |
|
|
2.2 MB 7-24-02 Windows XP / Windows 2000 / Windows NT 4.0 - Unzip and open the Read Me for installation instructions. |
|
|
| Disk 1 (NT&2K).zip |
1.1 MB 7-26-01 Disk 1 of 2 Windows NT 4.0 / Windows 2000 - Requires Disk 2 - Unzip and open the Read Me for installation instructions. |
| Disk 2.zip |
1.2 MB 7-26-01 Disk 2 of 2 Windows 95/98/ME/NT/2000 |
| Disk 1 (9x).zip |
1.2 MB 7-26-01 Disk 1 of 2 Windows 95/98/ME -Requires Disk 2 - Unzip and open the Read Me for installation instructions. |
| Postscript Level 2 Drivers: |
| epro42_1.exe |
1.17MB 11-16-98 Disk 1 of 2 Windows 95/98/NT4.0
PostScript and CCRF raster driver version 4.20 for EcoPRO Dry Film Imager firmware version
1.10P. Installation instructions are in file README.TXT. |
| epro42_2.exe |
1.14MB 11-16-98 Disk 2 of 2 Windows 95/98/NT4.0
PostScript fonts for EcoPRO Dry Film Imager firmware version 1.10P. |
| Firmware: |
| epro105p.exe |
1.15MB 06-30-97 EcoPRO firmware upgrade 1.05p PC
format for EcoPRO Dry Film Imager. Corrects head overtemperature condition; various
enhancements. |
| epro110p.exe |
1.33MB 11-16-98 Firmware upgrade version 1.10P PC
format for EcoPRO Dry Film Imager. Updates PostScript code; various enhancements. Requires
Windows 95/98/NT4.0 driver version 4.20. |
| Manual: |
| ecopro_manual.pdf |
796KB 09-22-97 EcoPRO Operator’s Manual in PDF
format. This file requires Adobe Acrobat Reader ® to view. Acrobat Reader ® can be
obtained from Adobe’s website at www.adobe.com |
| Miscellaneous: |
| bootdiag.exe |
59KB 09-22-99 Boot and
Diagnostic Code update version 1.01(P). Used to upgrade units from version 1.00
Boot/Diag code to the current 1.01(P) code. This upgrade is required for all
firmware versions 1.05(P) and newer. If you have any questions, please contact
EcoPRO Imaging technical support. |
| eclean95.exe |
32KB 04-23-99 Used to remove previous installed EcoPRO
drivers version 5.0 and the current 95/98 version 4.20. Run ecleannt.exe and it will
extract to eclean subdirectory. Run the EcoPRO Remove executable and it will request a
reboot. After the reboot the EcoPRO printers should be gone as well as the installed
files. NOTE: This file may adversely affect CalComp printer drivers. If you have any
questions, please contact EcoPRO Imaging technical support. |
| ecleannt.exe |
31KB 01-14-99 For NT 4.0 only. ecleannt.exe is used to
remove 4.20 or prior versions of the EcoPRO NT driver. Run it and it will extract a
ecleannt.inf file. Right click on the ecleannt.inf file and select install. Reboot the NT
machine and all EcoPRO devices will removed from printers. NOTE: This file may adversely
affect CalComp printer drivers. If you have any questions, please contact EcoPRO Imaging
technical support. |
| Mac:
|
| Postscript Level 3 Drivers: |
| ecopro_macdriver.bin |
4.2 MB 05-21-01 BIN/ self-extracting archive containing the latest Macintosh driver for the EcoPRO Dry Film Imager. Recommend MacOS 8.6 - 9.2 with Desktop Printers enabled. This new driver runs faster by rastering print information on the Macintosh rather than internally in the EcoPRO. Run the installer and read the documentation displayed before completing the install. |
| Ppd’s: |
| eproppd1.hqx |
41KB 08-05-98 HQX archive containing the PPD file for
Macintosh use with the EcoPRO Dry Film Imager and firmware revisions 1.05P or older. Place
this file in your "Printer Descriptions" folder located in the
"Extensions" folder. |
| eproppd2.hqx |
50KB 11-16-98 HQX archive containing version 2.0
Macintosh PPDs for use with EcoPRO Dry Film Imager and firmware version 1.10P. Place these
files in your "Printer Descriptions" folder located in the
"Extensions" folder. Ecopro2.ppd is used for Freehand and Quark. Use Ecopro.ppd
for all other applications. |
| Firmware: |
| epro105p.hqx |
1.32MB 06-30-97 HQX archive containing EcoPRO firmware
upgrade 1.05p for the EcoPRO Dry Film Imager. Corrects head overtemperature condition;
various enhancements. |
| epro110p.hqx |
1.53MB 11-16-98 HQX archive containing EcoPRO firmware
upgrade version 1.10P PC format for EcoPRO Dry Film Imager. Updates PostScript code;
various enhancements. Requires PPD version 2.0. |
| Manual: |
| ecopro_manual.pdf |
796KB 09-22-97 EcoPRO Operator’s Manual in PDF
format. This file requires Adobe Acrobat Reader ® to view. Acrobat Reader ® can be
obtained from Adobe’s website at www.adobe.com. |
| Miscellaneous: |
| epropdf.hqx |
34KB 06-24-99 HQX archive containing a PDF file for
use with Quark 3.32. Place this file in Quark’s "Printer Descriptions"
folder and select from within Quark. Refer to your Quark user’s manual for usage
information. |
