 |
|
Thermal Plotters |
Products |
|
|
|
|
Wide Format Thermal Plotters
SPECIFICATIONS
OPERATING REQUIREMENTS
Printhead Configuration
Single-substrate, linear array
Voltage
115 or 230 VAC (Auto-switch)
Printing Method
Direct thermal technology
Frequency
50-60 Hz
Resolution
200 or 400 dpi
Power Usage
90 Watts idle mode
1,000 Watts plot/print mode
Film Drive
Stepper motor
Paper Type
Premium Grade and Report Grade Bond
Temperature
Operating: 60° to 80° F (15° to 27° C)
Storage/Shipping Range: 14° to 158° F (-10° to 70° C)
Humidity: 5 to 95% non-condensing
Paper Length
500 foot roll
Film Type
Clear or matte finish
Film Length
200 foot roll
Media Temperature
Operating: 60° to 80° F (15° to 27° C)
Storage/Shipping Range: 14° to 86° F (-10° to 30° C)
Humidity: 5 to 95% non-condensing
Nib Size
2.5 x 3.0 mils (0.063 x 0.075 mm)
Optical Density
1.0 typical
Stepping Increment
0.3125 mils (0.008 mm)
Stepping Accuracy
0.15% or ± 0.1 in per 72 in
Dot Alignment Error
0.1%
Maximum Skew
0.1%
Character Set
96 ASCII characters (normal or inverted)
Character Size
16 x 20 dots (300 dpi), 32 x 40 dots (600 dpi)
Character Density
12.7 characters/in (5 characters/cm)
Configuration
Horizontal, Table, or Stand mount
Interface Type
Versatec Parallel
Shock - Half Sine-Wave
2 G
Vibration 5-50 Hz
1 G
Vibration 50-2000 Hz
2 G
1,000 Watts plot/print mode
Storage/Shipping Range: 14° to 158° F (-10° to 70° C)
Humidity: 5 to 95% non-condensing
Storage/Shipping Range: 14° to 86° F (-10° to 30° C)
Humidity: 5 to 95% non-condensing
| PLOTTER MODEL SELECTION CHART | |||
| Model | GS 624-2 | GS 636-2 | GS 644-2 |
| Part Number | 624-102601-1 | 636-102602-1 | 644-102603-1 |
| Media Width | 24" (60 cm) | 36" (91 cm) | 44" (112 cm) |
| Plot Width | 23.6" (59.94 cm) | 35.5" (90 cm) | 43.2" (110 cm) |
| Dots per Scan | 9,470 | 14,206 | 17,278 |
| Bytes per scan 400 dpi | 1184 | 1776 | 2160 |
| Bytes per scan 200 dpi | 592 | 888 | 1080 |
| Plot Rate - 200 dpi | 0.125 to 4 ips | 0.125 to 3 ips | 0.125 to 3 ips |
| Plot Rate - 400 dpi | 0.125 to 2 ips | 0.125 to 1.5 ips | 0.125 to 1.5 ips |
| Printing Speed - Lines/minute, 200 dpi | 1200 | 450 | 450 |
| Printing Speed - Lines/minute, 400 dpi | 600 | 600 | 600 |
| Height | 11 in (27.9 cm) | 11 in (27.9 cm) | 11 in (27.9 cm) |
| Width | 33" (83.8 cm) | 45" (114 cm) | 53" (134.6 cm) |
| Depth | 21 in (53.3 cm) | 21 in (53.3 cm) | 21 in (53.3 cm) |
| Net Weight | 120 lbs. (55 kg) | 155 lbs. (70 kg) | 185 lbs. (84 kg) |
If you have questions about any of our products, please don't hesitate to contact us via e-mail to seismic@oyo.com, or through conventional means to:
OYO Instruments, LP
7007 Pinemont Drive
Houston, TX 77040
(713)986-4444
Specifications are subject to change without notice.