 |
|
|
|
Products |
|
|
|
|
| SPECIFICATIONS | OPERATING REQUIREMENTS | ||
| Printhead Configuration | Single-substrate, linear array |
Voltage | 115 or 230 VAC (Auto-switch) |
| Printing Method |
Direct thermal technology | Frequency |
50-60 Hz |
| Resolution |
600 x 600 & 600 x 1200 dpi | Power Usage | 90 Watts idle mode 1,000 Watts plot/print mode |
| Film Drive |
Stepper motor |
||
| Paper Type | ThermoImpression Proofing Media | Temperature | Operating: 60° to 80° F (15° to 27° C) Storage/Shipping Range: 14° to 158° F (-10° to 70° C) Humidity: 5 to 95% non-condensing |
| Paper Length | 200 foot roll | ||
| Film Type | ThermoImpression Film |
||
| Film Length | 200 foot roll | Media Temperature | Operating: 60° to 80° F (15° to 27° C) Storage/Shipping Range: 14° to 86° F (-10° to 30° C) Humidity: 5 to 95% non-condensing |
| Optical Density (Film) | 4.0 typical (UV) |
||
| Stepping Accuracy | ± 0.01 %* | ||
| Dot Alignment Error | ± 0.01 %* | ||
| *Measured at a length of 60 inches |
|||
| IMAGESETTER MODEL SELECTION CHART | |||||
| Model | Liberator GMAX 1800 | Liberator GMAX 2800 | Liberator GMAX 3600 | Liberator GMAX 4200 | Liberator GMAX 5400 |
| Media Width | 18.25 in (46.35 cm) | 28.5 in (72.4 cm) | 36 in (91.44 cm) | 42 in (106.68 cm) | 54 in (137.16 cm) |
| Plot Width | 17.92 in (45.52 cm) | 28.16 in (71.53 cm) | 35.84 in (91.04 cm) | 41.81 in (106.20 cm) | 53.76 in (136.55 cm) |
| Plot Rate 600 x 600 Plot Rate 600 x1200 |
7.2 in/min (18.29 cm/min) 3.6 in/min (9.14 cm/min) |
7.2 in/min (18.29 cm/min) 3.6 in/min (9.14 cm/min) |
7.2 in/min (18.29 cm/min) 3.6 in/min (9.14 cm/min) |
7.2 in/min (18.29 cm/min) 3.6 in/min (9.14 cm/min) |
7.2 in/min (18.29 cm/min) 3.6 in/min (9.14 cm/min) |
| Height | 11 in (27.9 cm) | 11 in (27.9 cm) | 11 in (27.9 cm) | 11 in (27.9 cm) | 11.25 in (28.6 cm) |
| Width | 29 in (73.7 cm) | 37.5 in (95.3 cm) | 45 in (114 cm) | 53 in (135 cm) | 63 in (160 cm) |
| Depth | 21 in (53.3 cm) | 21 in (53.3 cm) | 21 in (53.3 cm) | 21 in (53.3 cm) | 21 in (53.3 cm) |
| Net Weight | 110 lb (50 kg) | 130 lb (59 kg) | 155 lb (70 kg) | 185 lb (84 kg) | 232 lb (105 kg) |
| LIMITED WARRANTY | |
| OYO Instruments Inc. warrants this product to be free from defects in material and workmanship for a period of one year from date of shipment. Use of media not approved by the manufacturer may void the warranty of the thermal printhead. |
|
| Specifications are subject to change without notice. |
OYO Instruments, LP 7007 Pinemont Drive Houston, Texas 77040 USA Fax 713-986.8724 713-986-4444 • 1-800-747-7651 www.oyo.com sales@oyo.com
|
| Optronics® and Intellidot® are registered trademarks, and SpeedScreen™, Impression™, and RipRight™ are trademarks of Optronics International Corporation. Harlequin® and ScriptWorks® are registered trademarks, and Harlequin Dispersed Screening™ and HDS™ are trademarks of Harlequin Group plc. PostScript® is a registered trademark of Adobe Systems Incorporated. |
