About the Film
ThermoImpression^TM Film is a specially coated polyester which, instead of being light sensitive like other graphic art films, is heat sensitive. When our imagesetters apply heat to the film, the reactive layer turns black and creates the image. Since all the magic is built into the film, our products don't require messy toners, dyes, inks or transfers. This is the only consumable needed for the Liberator, TechStyler, TechSetter, and EcoPro product lines.

---

ThermoImpression^TM GSP Film

---

Performance
ThermoImpression XP film provides excellent performance for the Liberator XE products.

• 4.0 to 5.0 UV Dmax
• .005" thickness for better handleability
• sharp dot quality
• visually clear .06 Dmin
• lays flat before and after exposure
• dimensionally stable for accurate registration
• light safe
• 180 foot rolls (no length limitations for your prints)
• Optimized to run at 600 and 1200 dpi

---

Performance
ThermoImpression SPx film provides excellent performance for the Liberator GS and Liberator GMAX products.

• 4.0 to 5.0 UV Dmax
• .005" thickness for better handleability
• sharp dot quality
• visually clear .06 Dmin
• lays flat before and after exposure
• dimensionally stable for accurate registration
• light safe
• 180 foot rolls (no length limitations for your prints)
• Optimized to run at 400, 400 x 800, and 600 dpi.

---

ThermoImpression^TM TS Film (TechStyler/TechSetter)

Performance
ThermoImpression TS film provides excellent performance for the TechStyler and TechSetter.

• 4.0 to 5.0 UV Dmax
• .005" thickness for better handleability
• sharp dot quality
• visually clear .06 Dmin
• lays flat before and after exposure
• dimensionally stable for accurate registration
• light safe
• 180 foot rolls (no length limitations for your prints)

---